GTA3801-2
GTA3801-3

Horsepower:
          760HP
Dimensions:
          39’L x 13’ W x 15' H
Control system:
          Murphy EICS

KEY HIGHLIGHTS:

  • Optimized cylinder selection maximizes operational flexibility and utilization of engine power
  • Pre-engineered design for expedited delivery and accelerated time-to-market
  • Factory load tested equipment and minimal assembly helps bring your operation online quickly

PACKAGE FEATURES:

  • Scrubbers ASME coded with 1/16" corrosion allowance
  • Piping adheres to ASME B31.3
  • API 5th Edition DA2 pulsation and vibration analysis performed for smooth operation
  • Murphy Centurion Panel
  • Rugged four-runner I-beam skid with environmental containment designed to be set on a prepared earth pad
  • Coalescing type fuel gas filter installed for maximum engine protection
  • Hot gas bypass on aftercooler section
  • Intel spool piece with basket strainer
  • Suction-based speed control
  • Automatic cooler Louvers
  • Heat tracing
  • Insulated scrubbers
  • Plumbed for "bolt-in" addition of automatic makeup/recycle valve
cta_image

THE WOLF - PERMIAN BASIN CASE STUDY

High-Pressure Gas Lift (HPGL) delivers strong artificial lift performance without the need for well intervention. But is it really as effective as ESP gas lift configurations? We partnered with 111-year-old operating company SM Energy to find out.

Email the Case Study

Engine: CUMMINS GTA38GCE

  • Dependable industry standard G3300 platforms backed by Cummins global dealer network
  • Engine Integrated Control System (EICS®)
  • 760 BHP @ 1800 RPM
  • 0.5 NOx, 2.0g CO standard emissions setting
  • Onboard alternator for reliable reliable 24V power
  • Electric starter (24V) for reliable starting independent of gas supply
  • Operator interface included for setup and service without a laptop
  • Pressure-based automatic speed control

Compressor: ariel jgj/2

  • World Standard Compressor backed by Ariel service and support network
  • Available 72-month warranty
  • VVCPs included on 1st and 2nd stages for maximum operational flexibility
Cylinder Size Pressure
1st Stage Cylinder 9-3/4"RJ 635 psig
2nd Stage Cylinder 6-3/8"RJ 1270 psig
3rd Stage Cylinder 3-5/8" RJ 2200 psig

COOLER: INDUCED DRAFT, VERTICAL DISCHARGE

  • 15°F approach to ambient on aftercooler
  • On-skid cooler simplifies an expedites unit transport and commissioning

 

  • Optimized intercooler gas sections minimize hydrate formation in winter months
  • Vertical air discharge minimizes noise and hot air recirculation

  • Performance GTA38-JGJ/4 |

  • Engine: Cummins GTA38GCE |

  • Compressor: Ariel JGJ/4

hpgl vs esp
year one cost evaluation

Is HPGL right for your operation? Walk through the Estis HPGL Evaluator and explore the economic analysis of ESPs and High-Pressure Gas Lift.

 

[ get evaluation ]

Contact Request